thick material test – Samcraft https://sam-craft.com Empowering the Side Hustling Small Business Owner Since 2018 Wed, 03 May 2023 03:43:25 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.2 https://sam-craft.com/wp-content/uploads/2019/09/cropped-samcraft-square-wood-large-1-32x32.jpg thick material test – Samcraft https://sam-craft.com 32 32 Laser Cutting Test File mm/s https://sam-craft.com/product/laser-cutting-test-file-mm-s/ https://sam-craft.com/product/laser-cutting-test-file-mm-s/#respond Sun, 12 Mar 2023 04:55:38 +0000 https://sam-craft.com/?post_type=product&p=46078 I consider this to be the most important set of test files and use them over and over again. These are my go-to files for use on my xTool D1 Pro and Gweike Cloud Pro CO2 lasers. I run these files for new materials, finishes, and suppliers. Don’t risk your expensive material to the wrong settings! This file package will run your laser at a variety of speeds and powers to help you find the best setting for cutting through materials on your laser.

Every laser is different. Don’t risk your project on someone else’s settings — test and lock yours in today!

  • These files require a Lightburn license. To get one, or download a free trial, visit this website: https://lightburnsoftware.com/
  • This file package consists of three test files to allow you to run through a wide variety of materials and thicknesses with your laser. Speed ranges are: 3-7 mm/s, 8-12 mm/s, and 13-17 mm/s.
  • BONUS:  Free xTool honeycomb bed hold down cut file! These little clamps hold your material secure and reduce problems associated with warped panels. Designed for the xTool honeycomb bed of 7mm spacing.

Watch this video for FULL DETAILS and learn how to use this file:

]]> https://sam-craft.com/product/laser-cutting-test-file-mm-s/feed/ 0 Multi-Pass Laser Cut Test Files mm/min https://sam-craft.com/product/multi-pass-cutting-test-files/ https://sam-craft.com/product/multi-pass-cutting-test-files/#respond Wed, 21 Dec 2022 04:20:56 +0000 https://sam-craft.com/?post_type=product&p=44954 Looking to really dive deep and test your laser on max material thickness cuts? Look no further! This is a file package that will run your laser through a variety of tests to allow you to pinpoint the best setting and number of passes to get through whatever material you throw at it!

This kit contains 14 Lightburn files that will let you dive deep into specific powers and passes for cutting through the thickest of materials! This kit of 14 individual files is sure to give you all the info you need to know the true capabilities of your machine!

Every laser is different. Don’t risk your project on someone else’s settings — test and lock yours in today!

]]> https://sam-craft.com/product/multi-pass-cutting-test-files/feed/ 0